Inspection and maintenance

After the force into the drive system causes vibration noise, which affects the positioning accuracy and expected service life. Chains and retractable connectors are particularly prone to backtracking or wear and therefore can come loose within a fairly short service life. Check and replace regularly when in use.

Axial alignment in the shaft connection is also ten. Points are important. When the connecting part is locked, nothing is left. What the gap. Overload through the output shaft on the CAM roller should be excluded, sometimes resulting in damage to the needle roller bearing. Therefore, we offer an. The whole device avoids these faults. Recommended for customers.

The CAM has its own special tools and checks in the assembly process. Therefore, the manufacturer prohibits the user to disassemble the CAM to view and replace the internal parts, because improper disassembly may cause damage to the intact parts, and increase maintenance costs invisibly. Therefore, in the event of an abnormal situation, it is recommended that the user contact the manufacturer in time. The after-sale personnel check the CAM and replace the parts if necessary to avoid the economic loss caused by the long-term failure of the CAM.

No matter how many times it is used, the lubricating oil will deteriorate in different situations. Therefore, the lubricating oil should be changed regularly, once a year. Conversely, be aware that too much lubricant can lead to abnormal temperature rise or oil leakage.

For the high-speed transmission mechanism, it is necessary to regularly check whether the connection between the index drive shaft and other torque drives is loose, and if there is an adverse phenomenon, it should be repaired, adjusted or replaced in time.

This product is a precision transmission component. Do not disassemble or adjust it without the guidance of the manufacturer's after-sales personnel.